This chapter describes Thin Server TFTPD and TFTPD Relay Server (TSTD) messages. For information on message content and how to use the message, refer to the Introduction.
| TSTD.001 |
Level: UI-ERROR
Short Syntax: TSTD.001 TFTP Relay message socket value msg value
Long Syntax: TSTD.001 TFTP Relay message socket value msg value
Description: Information messages for TFTP Relay to Master Host.
| TSTD.002 |
Level: C-INFO
Short Syntax: TSTD.002 Request from client IP-address about file peer number= peer-number
Long Syntax: TSTD.002 Request from client IP-address about file peer number= peer-number
Description: Request from client with IP address about a file has been received. The peer number has been assigned to this request.
| TSTD.003 |
Level: UI-ERROR
Short Syntax: TSTD.003 System resource error: error-code
Long Syntax: TSTD.003 System resource error: error-code
Description: A system resource error has occurred. Record the error code. Check the configuration parameters.
| TSTD.004 |
Level: C-TRACE
Short Syntax: TSTD.004 Port number assigned to this request port-number peer number peer
Long Syntax: TSTD.004 Port number assigned to this request port-number peer number peer
Description: Internal port number and peer number assigned to this TFTP request.
| TSTD.005 |
Level: UI-ERROR
Short Syntax: TSTD.005 Error sending file to client error code= error-code
Long Syntax: TSTD.005 Error sending file to client error code= error-code
Description: Error sending file to client check error for appropriate action.
| TSTD.006 |
Level: U-TRACE
Short Syntax: TSTD.006 Max. number of concurrent requests count current number value
Long Syntax: TSTD.006 Max. number of concurrent requests count current number value
Description: Maximum number of concurrent TFTP requests processed from the NetworkStations and the current number of requests.
| TSTD.007 |
Level: C-TRACE
Short Syntax: TSTD.007 Number of current TFTP Relay requests = number
Long Syntax: TSTD.007 Number of current TFTP Relay requests = number
Description: The number of current TFTP Relay requests.
| TSTD.008 |
Level: C-INFO
Short Syntax: TSTD.008 Request was(was relayed to Master Server not)
Long Syntax: TSTD.008 Request was(was relayed to Master Server not)
Description: A TFTP file request has been received and was (was not) relayed to the Master Server.
| TSTD.009 |
Level: U-TRACE
Short Syntax: TSTD.009 Packet Request options error options-error
Long Syntax: TSTD.009 Packet Request options error options-error
Description: TFTP packet request options error from client.
| TSTD.010 |
Level: C-INFO
Short Syntax: TSTD.010 File file - was(was found in local cache
Long Syntax: TSTD.010 File file - was(was found in local cache
Description: The requested file was (was not) found in the local cache.
| TSTD.011 |
Level: C-INFO
Short Syntax: TSTD.011 File file - was(was retrieved from Master server
Long Syntax: TSTD.011 File file - was(was retrieved from Master server
Description: The requested file was (was not) retrieved from the Master Server.
| TSTD.012 |
Level: UI-ERROR
Short Syntax: TSTD.012 Recoverable network or system resource error error-code
Long Syntax: TSTD.012 Recoverable network or system resource error error-code
Description: A recoverable network or system resource error has occurred.
| TSTD.013 |
Level: UI-ERROR
Short Syntax: TSTD.013 Error error-number sending OACK for block size to client peer-number
Long Syntax: TSTD.013 Error error-number sending OACK for block size to client peer-number
Description: Error sending OACK for block size negotiation to client.
| TSTD.014 |
Level: UI-ERROR
Short Syntax: TSTD.014 Error error-number in ACK to OACK block size from client peer-number
Long Syntax: TSTD.014 Error error-number in ACK to OACK block size from client peer-number
Description: Error receiving ACK for block size negotiation to client.
| TSTD.015 |
Level: UI-ERROR
Short Syntax: TSTD.015 Error packet received from client peer-number
Long Syntax: TSTD.015 Error packet received from client peer-number
Description: Error packet received from client during block size negotiation.
| TSTD.016 |
Level: UI-ERROR
Short Syntax: TSTD.016 Error opening file with return code= value
Long Syntax: TSTD.016 Error opening file with return code= value
Description: Error opening file with return code.
| TSTD.017 |
Level: UI-ERROR
Short Syntax: TSTD.017 Error reading file with return code= value
Long Syntax: TSTD.017 Error reading file with return code value
Description: Error reading file with return code.
| TSTD.018 |
Level: UI-ERROR
Short Syntax: TSTD.018 Error sending file to client peer= peer, at block= number, error= value
Long Syntax: TSTD.018 Error sending file to client peer= peer, at block= number, error= value
Description: Error sending file to client at block number with error value.
| TSTD.019 |
Level: UI-ERROR
Short Syntax: TSTD.019 Error receiving ACK from client peer= peer
Long Syntax: TSTD.019 Error receiving ACK from client peer= peer
Description: Error receiving ACK from client.
| TSTD.020 |
Level: UI-ERROR
Short Syntax: TSTD.020 Error packet received from client peer= peer
Long Syntax: TSTD.020 Error packet received from client peer= peer
Description: Error packet received from client.
| TSTD.021 |
Level: C-TRACE
Short Syntax: TSTD.021 Request for file complete peer= peer-number
Long Syntax: TSTD.021 Request for file complete peer= peer-number
Description: Request for file complete for client with peer number.
| TSTD.022 |
Level: C-TRACE
Short Syntax: TSTD.022 Wrong block ack.ed resend frame IP-Address, block= number, last block= number
Long Syntax: TSTD.022 Wrong block ack.ed resend frame IP-Address block= number, last block= number
Description: Wrong block ACK.ed from client. Resending frame to client.
| TSTD.023 |
Level: UI-ERROR
Short Syntax: TSTD.023 Timeout on response from client peer= peer
Long Syntax: TSTD.023 Timeout on response from client peer= peer
Description: Timeout occurred on response from client.
| TSTD.024 |
Level: U-INFO
Short Syntax: TSTD.024 Maximum TFTP threads exceeded thread-count
Long Syntax: TSTD.024 Maximum TFTP threads exceeded thread-count
Description: The Maximum number concurrent TFTP requests has been exceeded. The TFTP request will be processed on the next available thread.
| TSTD.025 |
Level: C-TRACE
Short Syntax: TSTD.025 Send frame to client, peer= peer, block#= block, block size= block-size
Long Syntax: TSTD.025 Send frame to client, peer= peer, block#= block, block size= block-size
Description: Sending frame to client. Block number and block size.
| TSTD.026 |
Level: C-TRACE
Short Syntax: TSTD.026 Resend frame to client IP-Address, block#= block, last block rec.ed= last-block-received
Long Syntax: TSTD.026 Resend frame to client IP-Address, block#= block, last block rec.ed= last-block-received
Description: Resend frame to client for block number.
| TSTD.027 |
Level: C-TRACE
Short Syntax: TSTD.027 ACK received from peer= peer, block rec.ed= block-number-received, block expected= block-number-expected
Long Syntax: TSTD.027 ACK received from peer= peer, block rec.ed= block-number-received, block expected= block-number-expected
Description: ACK received from client for block.
| TSTD.028 |
Level: UI-ERROR
Short Syntax: TSTD.028 NAK sent to client, peer= peer, error= error-code
Long Syntax: TSTD.028 NAK sent to client, peer= peer, error= error-code
Description: NAK sent to client.
| TSTD.029 |
Level: UI-ERROR
Short Syntax: TSTD.029 Open request failed on Host Server IP-address, error-code
Long Syntax: TSTD.029 Open request failed on Host Server IP-address, error-code
Description: Open request failed on Host Server check configuration parameters and network for Host Server access.
| TSTD.030 |
Level: UI-ERROR
Short Syntax: TSTD.030 Read request failed on Host Server IP-address, error-code
Long Syntax: TSTD.030 Read request failed on Host Server IP-address, error-code
Description: Read request failed on Host Server check configuration parameters and Host Server file access.
| TSTD.031 |
Level: UI-ERROR
Short Syntax: TSTD.031 TFTP thread(0x threadid) stack util( stack_util percent) file ( file_name) file avail( IsFileAvailable_rc)
Long Syntax: TSTD.031 TFTP thread(0x threadid) stack util( stack_util percent) file ( file_name) file avail( IsFileAvailable_rc)
Description: The stack utilization for thread threadid was stack_util which is dangerously high. The file_name and IsFileAvailable_rc may indicate a possible cause.